Koester - Reparaturmortel NC mineralinis remonto skiedinys
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
2.00EUR už kg
reklaminė kaina
vieneto grynasis
1.65EUR už kg
minimalus komercinis
produkto kiekis
25.00 kg
visos kainos
grynasis kainoraštis
49.97EUR
už 25.00 kg
visos kainos
reklaminis tinklas
41.36EUR
už 25.00 kg
kainoraščio kaina
bruto vienetas 2.46EUR
už kg
reklaminė kaina
bruto vienetas
2.03EUR
už kg
minimalus komercinis
produkto kiekis
25.00 kg
visos kainos
kainoraštis bruto
61.46EUR
už 25.00 kg
visos kainos
reklaminė bruto
50.87EUR
už 25.00 kg
Produkto aprašymas
A repair mortar, mineral reinforced with the addition of plastic fibers. It is used for repairing and leveling concrete surfaces. The product is characterized by high chemical and mechanical resistance. Suitable for leveling the substrate under anti-corrosion coatings such as Koester NB 1, PSM, CMC.
Properties
- very high adhesion to both old and new mineral substrates
- reinforced with plastic yarns
- based on cement with increased resistance to sulphates
- high chemical and mechanical resistance
- high compressive strength
- perfect for preparing the substrate for anti-corrosion coatings made of Koester PSM or Koester Silikatm rtel on facilities such as sewage treatment plants, industrial chimneys, industrial facilities exposed to aggressive chemical substances
Application
- repair and reprofiling of concrete substrates
- filling the cavity in
- leveling the concrete surface
- repair of elements in structures exposed to chemically aggressive environments and mechanically loaded, e.g. in industrial and agricultural facilities, water and sewage management, industrial chimneys under gas flow conditions in aggressive
Technical data
- mortar density about 1.90 kg / dm
- compressive strength:> 30 N / mm (after 7 days); > 45 N / mm (after 28 days)
- flexural tensile strength:> 3.5 N / mm (after 7 days); > 4.5 N / mm (after 28 days)
- modulus of elasticity> 15,000 N / mm
- shrinkage <0.5 mm / m
- maximum layer thickness (local losses) 5 cm
- application of subsequent layers (+20 C) after about 24 hours
- time to use the mortar (+20 C) approx. 25 min
- application temperature above +5 ° C
- consumption: about 2.0 kg / 1 dm 3 of ready mortar; about 20 kg / m2 / 1 cm of thickness
- package 25 kg bag
Techniniai duomenys - savybės
priedai