Koester - Sanierputz balto paviršiaus atnaujinimo tinkas
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
2.22EUR už kg
reklaminė kaina
vieneto grynasis
1.82EUR už kg
minimalus komercinis
produkto kiekis
25.00 kg
visos kainos
grynasis kainoraštis
55.39EUR
už 25.00 kg
visos kainos
reklaminis tinklas
45.45EUR
už 25.00 kg
kainoraščio kaina
bruto vienetas 2.72EUR
už kg
reklaminė kaina
bruto vienetas
2.24EUR
už kg
minimalus komercinis
produkto kiekis
25.00 kg
visos kainos
kainoraštis bruto
68.12EUR
už 25.00 kg
visos kainos
reklaminė bruto
55.91EUR
už 25.00 kg
Produkto aprašymas
A broad-porous, water-repellent, diffusion-open, cement-based, salt-resistant white renovation plaster. They are intended for salty and damp walls. The product allows for a glass-free desalination and drying of masonry. It has very good workability.
Properties
- salt-resistant
- high strength, making the product suitable for plastering masonry, even with high salinity and moisture.
- thanks to its high porosity and hydrophobicity, the renovation plaster allows for glass-free drying and desalination, even at high salinity levels
- protects against the formation of condensation water
- improves thermal insulation
- does not contain light fillers, so no additional surface treatment is required before applying subsequent layers (e.g. diffusion open wallpapers or paints)
- complies with WTA requirements
Application
- repair and renovation of salty and damp walls, including after restoring horizontal insulation using the injection technique, e.g. with Koester Crisin Creme or Koester Mautrol 2K
- Useful when no papering or painting the plaster is planned
- reduces the formation of condensation water after sealing with a mineral sealing micro-mortar (e.g. Koester NB 1) in rooms with high air humidity
- decorative, water-repellent exterior plaster; in advance, it is recommended to apply a sealing plaster in the plinth area up to 30 cm above the ground (Koester Sperrmortel) in advance
Technical data
- fresh mortar density 1.3 kg / l
- fresh mortar porosity 37 V-%
- compressive strength (28 days) approx. 2.3 N / mm 2
- bending strength> 1.4 N / mm 2
- porosity approx. 44 V-%
- E-module> 6000
- water vapor transmission factor μ = 7
- onset of binding about 3 h
- amount of water per 25 kg bag 3.1-3.6 l
- consumption approx. 12 kg / m per 1 cm thick layer
- package 25 kg bag
Techniniai duomenys - savybės
priedai