Koester - Verdammmortel dviejų komponentų greito kietėjimo skiedinys
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
5.30EUR už kg
reklaminė kaina
vieneto grynasis
4.37EUR už kg
minimalus komercinis
produkto kiekis
15.00 kg
visos kainos
grynasis kainoraštis
79.47EUR
už 15.00 kg
visos kainos
reklaminis tinklas
65.56EUR
už 15.00 kg
kainoraščio kaina
bruto vienetas 6.52EUR
už kg
reklaminė kaina
bruto vienetas
5.38EUR
už kg
minimalus komercinis
produkto kiekis
15.00 kg
visos kainos
kainoraštis bruto
97.74EUR
už 15.00 kg
visos kainos
reklaminė bruto
80.64EUR
už 15.00 kg
Produkto aprašymas
Two-component, quick-setting mortar for surface sealing of walls prior to structural or curtain injection, e.g. prior to injection with Koester Injektionsgel G4.
Properties
- application with a brush or putty knife
- can be loaded mechanically after 60 minutes
- the consistency of the mortar changes depending on the amount of the mixing fluid
- can be used on both horizontal and vertical surfaces
- the high addition of plastics guarantees high adhesion strength of the mortar to the substrate
- cures without shrinkage and stresses
- with the Koester Turbo additive, the material can be optimally adapted to the construction requirements
Application
- on mineral substrates, especially when it is necessary to quickly obtain a sealing effect
- full-surface sealing before drilling the hole for packers
- sealing the wall with packers before injection
- puttying concrete walls
- mortar for facets
- bonding bridge for mineral coatings
Technical data
- working time (+20 C) 20 min
- subsequent layers / injection (+20 C) after 60 min
- compressive strength: (1 h)> 10 N / mm; (3 h)> 20 N / mm; (1 day)> 30 N / mm; (7 days)> 35 N / mm; (28 days)> 40 N / mm
- flexural strength: (1 day)> 6 N / mm; (28 days)> 10 N / mm
- mortar density about 1.9 kg / l
- maximum layer thickness 30 mm
- consumption about 1.9 kg / l of ready mortar
- packaging: 15 kg bucket
Note: The compressive / bending strength is given after the end of the bond, with the addition of 18% Koester M plus +.
Techniniai duomenys - savybės
priedai