Dispersion adhesive, ready for use, produced in white. Designed primarily for gluing all types of ceramic tiles on the most difficult substrates such as OSB, chipboard, old ceramic cladding and underfloor heating indoors, etc. Ideal for gluing mosaic tiles. Does not discolor natural stone. Thanks to the long open time and correction of the tile placement, it is easy to work with. After drying, it has a very high elasticity, thanks to which it is resistant to deformation of the substrate. Waterproof and frost resistant.

Destiny

The adhesive is intended for gluing ceramic wall and floor tiles (stoneware, terracotta, clinker, glaze, mosaic tiles), natural stone tiles as well as plastic tiles, both for rigid and difficult (deformable) surfaces, good or poorly adhesive, indoors and outdoors. Substrates can be: ordinary concretes, lightweight aggregate concretes, cellular concretes, cement and cement-lime plasters, load-bearing limestone plasters, gypsum plasters, gypsum plasterboard and gypsum fiber boards, rigid chipboards and OSB, "dry" screeds, cement and anhydrite screeds, also with floor heating, old wall coverings made of ceramic tiles and oil paint panels and others. The adhesive is also suitable for fixing insulation and decorative panels (e.g. cork). It can be used outdoors and in places exposed to permanent water, e.g. in swimming pools.

Technical data

• mortar classification according to PN-EN 12004: 2008: D2E,
• initial shear strength (initial adhesion):> 1.0MPa,
• shear strength after immersion in water:> 0.5MPa,
• shear strength after thermal aging:> 1.0MPa,
• shear strength at elevated temperature:> 1.0MPa,
• application temperature (air, substrate, material in): from +5 C to +25 C,
• tooth size in trowel: from 3 to 10 mm,
• tile placement correction time:> 20 minutes,
• open drying time:> 30 minutes,
• Possibility of pointing: after 2 days at the earliest; when laying tiles on tiles, chipboards or OSB - this time may be longer depending on the thickness of the layer.