White, flexible, frost-resistant and water-resistant adhesive. The mortar is designed for bonding tiles and slabs of natural stone (marble, sandstone, limestone, granite, etc.), both on deformable and rigid substrates.

Application

• fixing all types in ceramic tiles (glaze, terracotta, clinker, stoneware), also large-format
• for marble, sandstone
• gluing tiles on difficult surfaces, on balconies and terraces, in wet rooms (bathrooms, kitchens, laundries)
• cement and anhydrite screeds, also with underfloor heating

Technical data

• grain size 0.5 mm
• classification according to EN 12004 + A1 C2TE
• shelf life after mixing with water 2 h (at a temperature of +20 C)
• time for laying tiles after applying the adhesive to the substrate up to 30 minutes
• correction time up to 20 minutes
• possibility of walking on the made cladding after 24 hours
• grouting possible after 48 hours
• mixing ratio with water about 6.5 liters of water per 25 kg of dry mix
• maximum mortar layer thickness up to 10 mm
• adhesion ≥ 1.0 N / mm
• average consumption per 1m ^{2 is} about 4.5 kg
• capacity for an average consumption of about 5.5 m ² per package
• soluble chromium VI content ≤ 0.0002%
• package 25 kg