Qmar - pistoleto putų surinkimas ir sandarinimas 70 L žiemą
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
8.24EUR už vnt
reklaminė kaina
vieneto grynasis
7.72EUR už vnt
minimalus komercinis
produkto kiekis
1.00 vnt
visos kainos
grynasis kainoraštis
8.24EUR
už 1.00 vnt
visos kainos
reklaminis tinklas
7.72EUR
už 1.00 vnt
kainoraščio kaina
bruto vienetas 10.14EUR
už vnt
reklaminė kaina
bruto vienetas
9.49EUR
už vnt
minimalus komercinis
produkto kiekis
1.00 vnt
visos kainos
kainoraštis bruto
10.14EUR
už 1.00 vnt
visos kainos
reklaminė bruto
9.49EUR
už 1.00 vnt
Produkto aprašymas
One-component polyurethane foam, pistol designed for specialized assembly groups for assembly, sealing and soundproofing.
Application
- assembly, sealing and joining of window and door frames
- thermal insulation of water, sewage and central heating networks
- gluing and insulating corrugated metal wall panels, roof tiles, etc.
- thermal insulation roof in and flat roof in
- filling gaps in thermal insulation when insulating buildings in skeletal structures
- embedding stairs, window sills and other finishing elements
properties
- above-average real performance - from one can you can get up to 65 liters per product
- excellent thermal insulation and soundproofing parameters
- regular structure, flexibility, waterproofness, thermal resistance and exceptional dimensional stability
- curing under the influence of atmospheric moisture
- high mechanical strength and excellent adhesion to typical ones
- material in construction materials such as: brick, concrete, plaster, wood, metals, polystyrene, hard PVC and rigid PUR foams
- provides stability and flexibility of the mounted element in
- resistance to mold and fungus in
Method of use
- Thoroughly clean and degrease the working substrate.
- Before use, make sure the can is positive (optimum +20 C).
- Shake the can well (for about 30 seconds) to thoroughly mix the ingredient in.
- Screw the gun to the can, the working position for assembly is the can position "to the top".
- Apply foam from below to the gap.
- Fill the joints up to 60% deep, but not more than 5 cm per layer. Wider than 5 cm should be filled in layers.
- Moisten each layer after application with water, e.g. with a sprayer.
- After curing, remove excess foam by mechanical means, e.g. with a knife.
- After full hardening, the foam should be protected against UV rays using plaster, paints, for example.
Techniniai duomenys - savybės
- efektyvumas (laisvas putojimas):
- 65 L
- matomas tankis:
- 19 ± 10% kg / m³
- nustatymo laikas:
- 2 - 24 h
- pakuotė [ml]:
- 750 ml
- šiluminė varža po sukietėjimo:
- od –60 do +100 ° C
- spalva:
- kremowy
priedai