Sika - Sika Primer MB hidroizoliacinis gruntas
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
34.96EUR už kg
reklaminė kaina
vieneto grynasis
31.89EUR už kg
minimalus komercinis
produkto kiekis
5.00 kg
visos kainos
grynasis kainoraštis
174.82EUR
už 5.00 kg
visos kainos
reklaminis tinklas
159.44EUR
už 5.00 kg
kainoraščio kaina
bruto vienetas 43.01EUR
už kg
reklaminė kaina
bruto vienetas
39.22EUR
už kg
minimalus komercinis
produkto kiekis
5.00 kg
visos kainos
kainoraštis bruto
215.03EUR
už 5.00 kg
visos kainos
reklaminė bruto
196.11EUR
už 5.00 kg
Produkto aprašymas
Epoxy, solvent-free, two-component primer and waterproofing substrate prior to bonding wooden floors with SikaBond adhesives.
Features
- binary
- solvent-free
- reactive epoxy
- good penetration and stabilization of the substrate
- low viscosity
- easy application
- shortens the time of work
- also suitable for old substrates
- can be used with heated floors
Application
The product is used in combination with SikaBond wood floor adhesives as: impregnation to strengthen concrete substrates, screed in anhydrite, cement mortar; as an anti-damp buffer for cement substrates with a moisture content of up to 6% CM (tested with the carbide method); as a preparation that improves adhesion to sanded asphalt surfaces, surfaces with remains of old glue and mortars.
Technical data
- chemical base two-component epoxy resin
- blue color
- density: component A ~ 1.10 kg / dm 3 ; component B ~ 1.00 kg / dm 3 ; mixture ~ 1.10 kg / dm 3
- Shore A hardness ~ 80 (after 7 days)
- compressive strength ~ 70 MPa (after 7 days)
- thermal resistance - resistance in a dry environment: constant ≤ +50 C; temporal ≤ +80 C
- operating temperature from -40 C to +70 C
- mixing ratio component A: component B = 100: 37 (by volume)
- consumption: 400–600 g / m 2 - concrete, cement mortars and anhydrite screeds, self-leveling anhydrite mortars; 250–300 g / m 2 asphalt layer sprinkled with sand
- ambient temperature during application from +10 C to +30 C
- relative air humidity at application <80%
- curing time: ~ 18 h (+10 C); ~ 12 h (+20 C); ~ 6 h (+30 C)
- 5 kg or 10 kg kit (component A 7.5 kg + component B 2.5 kg)
Techniniai duomenys - savybės
priedai