Sika-Sikaflex Pro-3 SL savaime išsilyginanti poliuretano sandarinimo medžiaga
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
20.95EUR už vnt
reklaminė kaina
vieneto grynasis
19.11EUR už vnt
minimalus komercinis
produkto kiekis
1.00 vnt
visos kainos
grynasis kainoraštis
20.95EUR
už 1.00 vnt
visos kainos
reklaminis tinklas
19.11EUR
už 1.00 vnt
kainoraščio kaina
bruto vienetas 25.77EUR
už vnt
reklaminė kaina
bruto vienetas
23.50EUR
už vnt
minimalus komercinis
produkto kiekis
1.00 vnt
visos kainos
kainoraštis bruto
25.77EUR
už 1.00 vnt
visos kainos
reklaminė bruto
23.50EUR
už 1.00 vnt
Produkto aprašymas
Sikaflex PRO-3 SL is a self-leveling, colored, flexible waterproofing material based on moisture-curing polyurethane.
Features
- one-component
- self-spilling
- remains flexible over a wide temperature range
- 35% deformation (ASTM C 719)
- good mechanical resistance
- good chemical resistance
- cures without microbubble formation in
- good adhesion to various substrates
- very low emissions
- resistant to water, sea water, diluted alkalis, cement slurry, water dispersions, detergent in
- short-term resistance (≤ 72 h) to diesel and aviation fuel according to DIBt
Application
The product is used to seal many types of gaps in floors and engineering structures. It guarantees a watertight filling with good mechanical properties. Seals gaps, cuts, vertical and horizontal joints, inside and outside rooms
- in the food industry
- in production halls
- in warehouses
- in tunnels and on bridges
- in airport pavements
- in parking lots
- in areas with pedestrian and vehicular traffic
- for ceramic tiles in public buildings
Technical data
- chemical base moisture-curing polyurethane (i-Cure technology)
- density ~ 1.40 kg / dm 3 (according to PN-EN ISO 1183-1)
- Shore A hardness ~ 28 (after 28 days; according to PN-EN ISO 868)
- secant tensile modulus of elasticity: approx. 0.45 MPa at 100% elongation (at 23 C); approx. 0.80 MPa at 100% elongation (at -20 C)
- elongation at break ~ 700% (according to PN-EN ISO 37)
- elastic return ~ 90%
- tear propagation resistance ~ 8 N / mm
- displacement transfer capacity: 25% (according to PN-EN ISO 9047); 35% (according to ASTM C 719)
- operating temperature from -40 C to +70 C
- storage time - stored in factory-closed, undamaged, tight packaging, in appropriate conditions, it is best to use it within 15 months from the date of production
- storage - should be stored in dry conditions, protected against direct sunlight, at a temperature between +5 C and +25 C
Techniniai duomenys - savybės
priedai