Sika - SikaHyflex -250 Fasado sandarinimo medžiaga
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
17.34EUR už vnt
reklaminė kaina
vieneto grynasis
15.81EUR už vnt
minimalus komercinis
produkto kiekis
1.00 vnt
visos kainos
grynasis kainoraštis
17.34EUR
už 1.00 vnt
visos kainos
reklaminis tinklas
15.81EUR
už 1.00 vnt
kainoraščio kaina
bruto vienetas 21.33EUR
už vnt
reklaminė kaina
bruto vienetas
19.45EUR
už vnt
minimalus komercinis
produkto kiekis
1.00 vnt
visos kainos
kainoraštis bruto
21.33EUR
už 1.00 vnt
visos kainos
reklaminė bruto
19.45EUR
už 1.00 vnt
Produkto aprašymas
High-quality sealing material intended for concrete, brick facades and external insulation systems (EIFS).
Features
- one-component
- very good resistance to weather conditions
- deformability + 100 / -50% (according to ASTM C 719)
- cures without gas bubble formation
- flexible
- bonding under the influence of moisture
- low ground pressure
- easy application and removal
- low module
- good adhesion to many different substrates
- solvent-free
- very low emissions
Application
The product is intended for flexible and watertight sealing of expansion joints and adjacent gaps in facades. Due to its very low modulus, SikaHyflex-250 Facade can also be used for sealing in external thermal insulation systems (EIFS).
Technical data
- chemical base moisture-binding polyurethane with i-Cure technology
- light gray color
- density about 1.35 kg / dm 3 (according to PN-EN ISO 1183-1)
- Shore A hardness (after 28 days) about 20 (according to PN-EN ISO 868)
- secant tensile modulus: about 0.30 MPa (23 ° C) at 100% elongation; about 0.60 MPa (−20 C) at 100% elongation (according to PN-EN ISO 8339)
- elongation at break approx. 800% (according to PN-ISO 37)
- elastic recovery approx. 80% (according to PN-ISO 7389)
- tear propagation resistance approx. 5.0 N / mm (according to PN-ISO 34)
- displacement transfer capacity 25% (according to PN-EN ISO 9047) + 100 / −50% (according to ASTM C 719)
- resistance to weather conditions 10 (according to ISO / DIS 19862)
- operating temperature from -40 C to +70 C
- packaging capacity of 600 ml from 1.3 to 6 m; depending on the width and depth of the joint
- drainage (profile 20 mm, 50 C) 0 mm (according to PN-EN ISO 7390)
- substrate and ambient temperature from +5 C to +40 C
- curing speed (23 C / 50% relative humidity) approx. 3 mm / 24 h (according to CQP 049-2)
- skinning time (23 C / 50% relative humidity) approx. 70 min (according to CQP 019-1)
- smoothing time (23 C / 50% relative humidity) approx. 65 min (according to CQP 019-2)
- foil packaging 600 ml, 20 pieces in a carton
Techniniai duomenys - savybės
priedai