Sika - vandeniui atspari remonto medžiaga, sustiprinta SikaBlackseal -301 pluoštais
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
6.77EUR už kg
reklaminė kaina
vieneto grynasis
6.18EUR už kg
minimalus komercinis
produkto kiekis
5.00 kg
visos kainos
grynasis kainoraštis
33.87EUR
už 5.00 kg
visos kainos
reklaminis tinklas
30.88EUR
už 5.00 kg
kainoraščio kaina
bruto vienetas 8.33EUR
už kg
reklaminė kaina
bruto vienetas
7.60EUR
už kg
minimalus komercinis
produkto kiekis
5.00 kg
visos kainos
kainoraštis bruto
41.66EUR
už 5.00 kg
visos kainos
reklaminė bruto
37.99EUR
už 5.00 kg
Produkto aprašymas
Fiber-reinforced, solvent-based material for waterproofing and repairing scratches on bituminous membranes, brick, concrete and mortar. It does not contain asbestos. Apply with a trowel.
Features
- ease of application
- can be applied with a trowel or putty knife
- delivered ready to use
- resistant to UV radiation
- does not run off vertical surfaces
- flexible, even at low temperatures
- ability to absorb scratches on the substrate
Technical data
- color / form black paste
- chemical base bituminous mass containing a solvent
- density 1.20-1.30 kg / l
- setting speed surface dry after 2 hours at +20 C (depending on the ambient and substrate temperature, relative humidity and coating thickness)
- solids content ~ 37% (by volume)
- volatile compounds in organic (VOC) ~ 15% (by volume)
- bitumen content in ~ 50% (by volume) solids
- coat thickness up to 5 mm
- service temperature minimum -30 C / maximum +70 C
- watertight up to a pressure of 0.50 bar
- high temperature behavior - softening point (ring and ball method)> 170 C (dry coating)
- Crack bridging capacity <2.0 mm (unreinforced coating) at +4 ° C
- resistant to fresh water, sea water and humic acids (from soft groundwater)
- consumption ~ 1.20 kg / m 2 / mm of layer thickness
- application conditions: substrate and ambient temperature minimum +10 C / maximum +35 C; substrate moisture <3%
- storage conditions - product stored in factory-sealed, original and undamaged packaging is best used within 12 months from the date of production; protect against heat and direct sunlight
- package 5 kg
Techniniai duomenys - savybės
priedai