A water-borne silicate-dispersion paint based on a mixture of the highest quality pigments, resins, silica, fillers and additives for ennobling and protecting. The paint coating creates a uniform, smooth surface.

Application

The paint is intended for use inside buildings, for the first and renovation painting of walls, ceilings and other construction substrates, such as old alkyd coatings (so-called oil lamperies), cement boards, cement-knin, gypsum, plasterboard, gypsum, cement, cement-lime, concrete substrates, thin- and thick-layer mortars, putties and finishing coats based on gypsum and cement mixtures. In particular, it is recommended for painting old oil panels without the need to remove them first (matting is enough), rooms exposed to dirt (including public utilities, such as schools, hospitals, offices) and substrates with high utility requirements, e.g. high resistance for abrasion and scrubbing.

Features

• good coverage with just one application
• for making ecological (water) paneling
• high adhesion to old alkyd coatings
• high resistance to abrasion and scrubbing
• based on a water blend of resin dispersion, silica and high-quality additives
• matte
• white or dyed according to Colors of Termo Organika
• for interior

Technical data

• application and substrate temperature from +5 C to +30 C
• optimal working temperature from +10 C to +25 C
• approximate consumption 0.10 0.13 l / m ²
• indicative capacity 8.0-12.0 m ² / l
• resistance to wet scrubbing, type I according to PN-C-81914: 2002, class 1 according to PN-EN 13300: 2002
• application of subsequent layers after a minimum of 2 hours
• drying time 1-2 h
• recommended number of layers 1-2 depending on the absorbency and condition of the substrate
• VOC content according to Directive 2004/42 / EC: / td> below 20 g / l (the VOC content limit according to Directive 2004/42 / EC, Cat. A / a / WB is 30 g / l (2010))
• storage the paint is suitable for use within 24 months from the production date, provided that it is stored in its original, closed packaging, in dry conditions; store and transport in factory sealed packaging at temperatures between +5 C and +30 C; do not stack pallets on top of each other; protect against frost and direct sunlight

Note: The given drying time at the substrate and ambient temperature of approx. 20 C and relative air humidity of approx. 50%. Consumption and efficiency are given for one coat; depending on the smoothness and absorbency of the substrate, the method of application, and room temperature.